Gear Housing Dismantling - Porsche 911 GT3 Cup 2018 Techical Manual

Powertrain
2.8.1.5
2.8.2.1
2.8.2.2
2.8.2.3
911 GT3 Cup (991 II)
84
Remove the heat exchanger
WARNING
Reduce system pressure in a controlled manner via the connecting coupling (arrow).
WARNING

2.8.2 Gear housing dismantling

Remove the locking ring (1) of pinion shaft and rotation prevention (Figure 2.8.2.1)
By twisting the pinion shaft, engage gear 1 and fix the drive shaft in place with tool no.
19 (Figure 2.8.2.2)
Loosen the pinion shaft nut with socket SW 38 Porsche spare part No.:
9R6.450.304.00 (do not remove the pinion shaft nut)
MY 2018
Releasing pressure
Risk of eye injuries
Danger of scalding
Let the fluid cool down.
•
Wear personal protective equipment.
•
Corrosive fluids
Danger of chemical burns
Wear personal protective equipment.

 Ensure good ventilation.
 Avoid contact with corrosive fluid.
 If you do come into contact, wash off
immediately with plenty of warm water and
contact a doctor if necessary.
Version: 4/20/2018