7.7 Maintenance intervals
7.7.1 After 200 km (124 mi) or first test drive
Visual inspection of all systems, lines, etc. for leaks, damage or chafing
Check the specified tightening torque of all safety critical bolts
Check all wheel suspension bolts
Check the drive shafts
Check the engine suspension
Check the gearbox suspension
7.7.2 After each session
Visual inspection of all systems, lines, etc. for leaks, damage or chafing
Check the specified tightening torque of all safety critical bolts
Check the shock absorbers for leaks
Fuel extraction and determination of fuel consumption
Check all wheel suspension joints for play
Clean the radiators
Remove dust and rubber abrasion from the brake disks and calipers
Vent the brake system
Vent the clutch (1x per race weekend)
Clean driver's foot space and check for functionality
Clean and check wheel nut lock
Check the oil level
Check drive shaft sleeve for damage
Check steering system sleeve for damage
Check all systems for leaks
Version: 4/20/2018
Maintenance
911 GT3 Cup (991 II)
MY 2018
407