Porsche 911 GT3 Cup 2018 Techical Manual page 477

After Sales
Aftersale
Aftersale
911 GT3 Cup (991 II)
476
8
Sensor holder rear axle
Torque screw M6x16 pos. 8 (Figure 8.12.4): 10 Nm
Torque screw M5x12 pos. 6 (Figure 8.12.4): 8 Nm
8.12.4
Screw the coupling rod to the holder. (coupling rod/wishbone) (pos. 9 Figure

8.12.4).
 Connect the sensor to the cable
Make sure that no contact with the chassis gear parts and the cable harness
can occur.
MY 2018
harness. Fix cable harness with cable ties.
Calibration of the sensor (see chapter Electrical
Information
systems)
Version: 4/20/2018