Porsche 911 GT3 Cup 2018 Techical Manual page 153

Powertrain
2.9.20.13
2.9.20.14
2.9.20.15
2.9.20.16
911 GT3 Cup (991 II)
152
Porsche Motorsport points out that the mounting of the sprengren on the articulated
flange has to be carried out by the following procedure. The assembly is carried out
with the support of an O-ring in the sprengren groove, the instruction applies to both
joint flanges.
Clean the joint flange as well as the sprengren groove
Grease the O-ring, push it onto the articulated flange and insert it into the cutting groove
groove
NOTE
HINWEIS
Insert the Sprengring with the Sprengring pliers in the Sprengring groove.
MY 2018
Make sure the sprengring fits securely. O-ring must
not be damaged during assembly
Version: 4/20/2018