Position The Seat Bracket At The Rear Position - Porsche 911 GT3 Cup 2018 Techical Manual

After Sales
Aftersale
Aftersale
911 GT3 Cup (991 II)
458
8
NOTE
8.5.4.3
 Mount the harness to the top fixation point of the battery cover using the
rubberized clamp and TORX screw.
Attach the IPS to the top of the battery cover using „VELCRO". The new

position of the IPS is shown in the picture below.
8.5.5

8.5.5 Position the seat bracket at the rear position.

Caution
8.5.5.1
 Remove the adjusting lever with linkage (arrow).
 Remove the transport strut only when the seat bracket is mounted on the
body.
MY 2018
Risk of damage to the IPS.
A proper IPS fixation has to be ensured to

prevent damage during car operation.
A loose ECU may cause malfunction of the

whole car electronics!
Moving parts
Risk of injury when adjusting the console
Be careful with your hands when adjusting the
console
Version: 4/20/2018