Porsche 911 GT3 Cup 2018 Techical Manual page 446

 Remove cathodic dip coating on the outer skin from inside at the bonding
surface (Figure 8.4.1.2)
 Roughen/grind bonding surface at carbon ring with air grinder
Apply adhesive bead to carbon ring (Figure 8.4.1.3), adhesive: DP 490

Information
8.4.1.3
 Carefully position the ring on the inner side of the lid and fix in position with
screw clamps (Figure 8.4.14)
 Immediately remove any adhesive which emerges on the outside
Information
8.4.1.4
Version: 4/20/2018
Curing time 6 hours
Do not tighten the screw clamps too tightly;
the ring and outer skin must be flush
After Sales
Aftersale
8.4.1.2
911 GT3 Cup (991 II)
MY 2018
8
445