7.3.2 Clutch
Check the following during any inspection:
Check clutch basket, hub, sintered disk for cracks
Check spring tongues for wear
Check housing lugs for wear
New sintered lining
Replace at
Installation
Make sure that the star shapes of the multiple-disk clutch sintered disks are
aligned if possible.
Lightly grease the gear teeth and move the clutch disks back and forth on
the drive shaft until the hub moves smoothly on the shaft, remove excess
grease.
No grease should get on the clutch linings.
Version: 4/20/2018
3.40 mm (0.13")
3.00 mm (0.12")
Maintenance
7.3.2.1
911 GT3 Cup (991 II)
MY 2018
385