Table of Contents
Advertisement
4.11.2
Preparing the window cutout for installation
1.
Remove glue on the body.
Remove residual glue (1) with (electric special cutter) WE1137 electric
special cutter Fein and scraper (U shape 639.031.130.22) on the body so
that a glue residue remains on the entire area (2).
Information
2.
Clean and prime paint damages resp. newly built-up paint surfaces in the window
cutout of the body.
Information
Clean and activate the gluing surface of the window cutout.
Version: 4/20/2018
The area-wide glue residue serves as primer for the
new glue material. Keep cut surfaces clean and free
of grease and do not clean with cleaning solution.
A flash-off time of at least 10 minutes should be
observed between cleaning of the gluing surface and
application of the primer! The body must be free of
any cleaning solution residues.
Bodywork
4.11.2.1
4.11.2.2
911 GT3 Cup (991 II)
MY 2018
243
Advertisement
Table of Contents
