Porsche 911 GT3 Cup 2018 Techical Manual page 293

Bodywork
4.16.1.15
4.16.1.16
4.16.1.17
911 GT3 Cup (991 II)
292
Cut the thread to the dimension (Y) with a cutting tool



During press fitting in the basic thread, forming the internal thread requires
perceptibly more force on the inserter. Press fitting is completed as soon as the
inserter turns again more easily.
Unscrew the inserter (E) from the threaded bushing.
MY 2018
Place the threaded bushing on the inserter
Oil the inserter (E)
Manually screw the threaded bushing (A) on the inserter (E)
Version: 4/20/2018