Table of Contents
Advertisement
Chassis
3.3.5.3
3.3.5.4
3.3.5.5
911 GT3 Cup (991 II)
196
Coupling rod setting
NOTE
When adjusting the coupling rods, make sure to exclude any collision between the anti-
roll bar and other components over the entire suspension travel. On the rear axle, there
is a risk of collision with the longitudinal control arm or the rim if the setting is incorrect.
A distance of 12 mm (0.47 inches) towards the control arm is recommended when the
axle is decompressed (figure 3.3.5.4).
Axial clearance compensation
To counteract any possible axial play of the rear stabilizer, Porsche Motorsport offers
two differently sized spacers (pink).
Spacer 1mm
Spacer 2 mm
MY 2018
1
Adjusting the coupling rod
2
Collision with trailing link
Collision with rim
Observe a distance of at least 12 mm (0.47
•
inches) to the control arm in decompressed
condition.
Version: 4/20/2018
Advertisement
Table of Contents
