Oil Level Measurement With Display (Optional) - Porsche 911 GT3 Cup 2018 Techical Manual

Conditions for a correct measurement:
 Filling port for oil must be closed!
 The vehicle must be on a flat, level surface (Figure 7.1.1.2)
 Engine at operating temperature, oil temperature 80°C /176°F ("eco_toil"
<80°C/176°F)
 Oil measurement requires ~120 sec. transient adjustment (Figure 7.1.1.1)
 The oil level should read between 50-100% (Figure 7.1.1.3)
 Each 10% interval represents 0,1 liter of oil
Information

7.1.2 Oil level measurement with display (optional)

NOTE
A digital oil level indicator (Figure 7.1.2.1) is available as an option.
The vehicle wiring harness is already prepared for using this indicator. The connector
for the indicator can be found vehicle-mounted on the main wiring harness near the
center tunnel.
Version: 4/20/2018
The difference between the MIN. and MAX. marks is
approx. 1 liter (1 qt). Top up engine oil one half liter
(half quart) at a time! The filling level is specified in the
ICD as a percentage (0% = min, 100% = max).
Oil level too high when measured using the LED
display
Oil getting into the intake duct
Damage to the engine
Oil level must not exceed 90% according to

the LED display.
 Filling port for oil must be closed
Maintenance
7.1.1.2
50 – 100
7.1.1.3
7.1.2.1
911 GT3 Cup (991 II)
MY 2018
369