Assembling The Footwell Cover - Porsche 911 GT3 Cup 2018 Techical Manual

WARNING
8.5.2.4
Mount the shoulder straps in the same way as the shoulder straps of the

driver on the harness bar of the safety cage.
8.5.3

8.5.3 Assembling the footwell cover

8.5.3.1
Relocate the fire extinguisher control unit as shown in the picture below and

mount it in its new position with "Velcro" tape.
 Attach the footwell cover to the chassis on the existing tucker bolts with
plastic nuts.
Use the ground bolt on the right side as additional fixation.

Version: 4/20/2018
Severe injuries or death may occur
Verletzungsgefahr durch falsche Montage
Incorrect wrapping or 3-bar slides wrapped

too far away from the roll cage bar or from
any bracket may allow webbing to slide
during an accident
After Sales
Aftersale
911 GT3 Cup (991 II)
MY 2018
8
455