Locking Sleeve - Porsche 911 GT3 Cup 2018 Techical Manual

2.9.11 Locking sleeve

Abutment assembly:
Insert the lever (1) into bearing spindle abutment (4)
Press in bushing (2)
Insert the compression spring (3) between housing and lever
The bushing (2) must be flush with the housing (4)
Tension the lever with a slot screwdriver and insert the locking sleeve in the gearbox
housing
Put on Simmonds nuts (3) and tighten with 10 Nm (7.4 ft-lb)
Put on the screw (1) with adhesive Loctite 243 and tighten with 25 Nm (18.4 ft-lb)
Tighten Simmonds nut M8 (2) with 25 Nm (18.4 ft-lb)
Version: 4/20/2018
Powertrain
2.9.11.1
2.9.11.2
2.9.11.3
911 GT3 Cup (991 II)
MY 2018
129