Bodywork
4.10.2.1
911 GT3 Cup (991 II)
238
4.9
To further reduce vehicle weight, the doors are made of CFRP.
4.10
WARNING
Gas pressure springs are mounted on trunk and engine lids.
4.10.1
WARNING
The trunk lid is made of aluminum sheet and optimized for the special motorsport
requirements. It is provided with NACA intakes on the left and right providing air
supply to the interior. The lid is closed by two lid pins.
4.10.2
The engine lid is made of carbon fiber reinforced plastic (CFRP) and is connected by
two hinges to the body. Opening is supported by a gas pressure spring so that work
can be carried out with the lid open without requiring additional support. As with the
front trunk lid, two lid pins are used as a lock.
MY 2018
Doors
Trunk and engine lid
Trunk or hood lid opening while driving
Trunk lid bangs against the windshield
Visual obstruction for the driver
Push lid pins fully through and carefully close
•
quick-connecting locks (Figure 4.10.2.1).
Trunk lid
Fogged windshield
visual impairment
Never cover the right Naca (driving direction) he
•
supplies the heating box with fresh air
Engine lid
Version: 4/20/2018