Mounting Gearhousing - Porsche 911 GT3 Cup 2018 Techical Manual

Powertrain
2.9.20.1
2.9.20.2
2.9.20.3
911 GT3 Cup (991 II)
148

2.9.20 Mounting gearhousing

Insert the upper O-ring of the shift rod into the notch (Bild 2.9.20.1)
O-ring (1) and insert into gearbox housing (Bild 2.9.20.2)
Once all adjustments have been made, the cut housing can be replaced by the wheel
housing. Drive and pinion shaft are already equipped with this section.
Attach housing and tighten evenly (25 Nm)
MY 2018
Version: 4/20/2018