Table of Contents
Advertisement
After Sales
Aftersale
Aftersale
911 GT3 Cup (991 II)
464
8
8.6 Fitting the base plate and additional weights
8.6.1
Preparation of the bodyshell for the base plate and additional
weights
NOTE
8.6.1.1
It´s necessary to install threads into the four console fixation points on the
chassis floor.
A conventional thread cutter must not be used.
The threads will be created by using self-tapping drill screws.
MY 2018
Risk of damage to the threads
Make sure the self-tapping drill screws are
proper centered and aligned!
The following work must only be performed if no taxi
Information
seat was previously installed
Version: 4/20/2018
Advertisement
Table of Contents
