2.8.8 Pinion shaft dismantling
Remove locking ring and mounting lid (arrow) of the pinion shaft in the transmission
shell (Figure 2.8.8.1)
Take out the pinion shaft through the assembly opening
WARNING
Press out the cylinder roll bearing of the pinion shaft with tool no. 44 (Figure 2.8.8.2)
See 2.8.7 cross shaft dismantling
Version: 4/20/2018
Mechanical, hydraulic or pneumatic press
Risk of crush injuries
Read specific safety information for the
press.
Check that the press is working perfectly
before use, particularly the safety
components.
Powertrain
2.8.8.1
2.8.8.2
911 GT3 Cup (991 II)
MY 2018
91