Check the ease of movement of the bearing
Attach locking ring (3) for the nut
Attach locking ring
Place the greased O ring (130x2.5) on the lid
Visually check the gearbox housing
Put on the adjusting disk (basic 1.4) P2
Insert the shaft with the lid (rotate shaft slightly to prevent two teeth of ring gear and
bevel gear from touching directly)
Tighten the lid with every second nut using a crisscross pattern (25 Nm (18.4 ft-lb))
Version: 4/20/2018
Powertrain
2.9.18.7
2.9.18.8
911 GT3 Cup (991 II)
MY 2018
139