PrimeLab 1.0 MULTITEST User Manual page 346

PrimeLab Desktop Assistant
Menu: Parameter / Remote control the PrimeLab
The "PrimeLab Desktop Assistant" has the feature of conducting remotely controlled
measurements, for which you prepare the settings and measurement steps on
screen and the PrimeLab device itself is "only" used for the actual measurement.
The advantage of this procedure is that the individual measurement steps are more
extensively described on the software screen than on the PrimeLab device display
and that the results can be directly saved on the PC, saving all synchronization
work.
It is also easier to enter settings, such as the ideal value ranges, on the keyboard
than through the buttons of the PrimeLab device.
To initiate a remotely controlled measurement...
• either go directly into the menu "Remote control"
or
• select the menu "Account data" and then the first tab "Account data".
Double click on an account for which you want to conduct measurements and the
main screen of the menu "Remote control" is opened.
Then follow the instructions described in the section "Remotely controlled
parameters / measurements".
or
•select the menu "Account data" and the first tab "Account data". Right click an
account for which you want to conduct a measurement, and select from the
submenu opened the entry "Start measurement". The main screen of the menu
"Remote control" is opened. Then follow the instructions described in the section
"Remotely controlled parameters / measurements".
or
• In the menu "Parameters" double click a measurement method. The main screen
of the menu "Remote control" is displayed. Then follow the instructions described in
the section "Remotely controlled parameters / measurements".
PDA-32 PDA-32