PrimeLab 1.0 MULTITEST User Manual page 135

Hardness-total (HR)
(57)
Continued...
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
Note(s)
-> (*) Conversion to °dH, °eH, °fH and Ca
-> If your sample water is very alkaline or acidic it should be brought within the
pH range between 4 and 10 by adding 1 mol/l acetic acid or resp. 1 mol/l
caustic soda.
102
20 - 500 mg/l
Name on device: 57-Hard-tot-HR-tab
Possible messages in the line below the measurement value:
"low! / high! / good!":
„Overrange! / underrange!":
(CaCO ) Tablet
3
102