Table of Contents
Advertisement
Menu: SET (Setup)
Set date / time
Setting the correct date and time is important because each measurement
value is saved with a date and time stamp.
The time can also be very easily set via the "PrimeLab Desktop Assistant".
In the start menu press button 4 to access the SETUP menu.
4
In the setup list scroll up with button 2 and down with button 3 until the
2
3
entry "Date/Time" appears in white on black.
Then press button 4.
4
In the list scroll up or down with button 2 or 3 respectively until the
2
required entry (Date or Time) appears in white on black.
3
Confirm your selection by pressing button 4.
4
Below the number to be changed you will see a cursor (^).
The time must be entered in the 24:00 hour mode, the date in the format
DD.MM.YY.
2
Use buttons 2 or 3 to increase or decrease the respective number.
3
If and when the number is correct, press button 4 to confirm and move to
the next position.
4
When the last entry for the time or date has been made return to the sub-
4
menu "Date/Time" by pressing button 4.
When you are finished with setting the date and time, leave the sub-menu
1
by pressing button 1 to return to the SETUP menu.
SET 2
SET 2
Hide quick links:
Advertisement
Table of Contents
