PrimeLab 1.0 MULTITEST User Manual page 19

Menu: MEM (Memory)
Clear test results
Press button 3 on the start menu to access the MEMORY menu,
3
First you will see how many data sets are saved in memory. "Used:
28/100" signifies, for example, that 28 saved data sets are stored in a
maximum of 100 memory spaces available.
You now have two options to delete saved results:
Option 1) Delete all saved test results
Option 2) Selectively delete individual test results
Option 1)
Scroll up and down in the list using buttons 2 and 3 respectively, until the
2
3
entry "Clear result" appears white on black.
Then press button 4.
4
You will then be asked if you really want to delete all saved data sets.
4
Confirm this by pressing button 4 or abort the procedure by pressing
button 1.
1
Option 2)
Scroll up and down the list using the button 2 (up) and 3 (down) until the
2
3
entry "Browse results" appears in white on black.
Then press button 4.
4
Using the buttons 2 and 3 select an account you want to see the saved
2
results for.
3
Confirm your selection by pressing button 4.
4
Scroll up and down the list using the button 2 and 3 respectively, and then
2
select "View by test" (selection a) or "View all data (selection b).
3
Confirm your selection by pressing button 4.
4
Selection a) You have selected "View by test" to see the stored test
results for this account sorted by parameters. Use button 2 and 3 to scroll
up and down respectively until the parameter group in which you want to
2
3
delete test results appears in white on black.
Confirm your selection by pressing button 4.
4
Now press button 2 or 3 to scroll to the parameter ID of which you want to
2
delete test results.
Confirm your entry by pressing button 4" on page MEM 4
MEM 3
Continued...
MEM 3