Table of Contents
Advertisement
Iron (MR)
(29)
Continued...
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
Note(s)
->
(*) Special accessories required / not included as standard equipment!
->
If the sample needs to be filtered (dissolved iron) it must be ensured that
after filtration there are no more undissolved iron parts in the sample. If you
are unsure, please repeat the filtration.
->
Very alkaline and acidic water samples must be adjusted to a pH value
between 3 and 5 before commencing the measurement.
->
The measurement is not influenced by undissolved powder.
->
If the water samples contains visible rust the reaction time must be 5
minutes. In this case wait for 2 minutes before initiating the step "TEST"
124
0 - 10 mg/l
Name on device: 29-Iron-MR-pow
Possible messages in the line below the measurement value:
"low! / high! / good!":
"Overrange! / underrange!":
2+/3+
(Fe
)
Powder
124
Hide quick links:
Advertisement
Table of Contents
