Set Display Contrast; Set Auto-Off Time - PrimeLab 1.0 MULTITEST User Manual

Menu: SET (Setup)

Set display contrast

Please ensure that you have removed the protective foil from the display
so the display quality is best.
In the start menu press button 4 to access the SETUP menu.
4
In the setup list scroll up with button 2 and down with button 3 until the
2
entry "Display" appears in white on black.
3
Then press button 4.
4
Change the contrast setting by pressing button 2 and button 3 (up and
2
down) until the contrast on the display is satisfactory.
3
Confirm the selected setting by pressing button 4.
4

Set Auto-Off time

You can determine after which time without any button being pressed or a
measurement being taken the device will automatically switch off to save
energy or preserve battery charge.
In the start menu press button 4 to access the SETUP menu.
4
In the setup list scroll up with button 2 and down with button 3 until the
2
entry "Auto-Off" appears in white on black.
3
Then press button 4.
4
Change the time setting for the auto-off by pressing button 2 and button 3
2
3 (up and down). The preset default is 10 minutes.
Confirm the selected setting by pressing button 4.
4
SET 7 SET 7