PrimeLab 1.0 MULTITEST User Manual page 336

PrimeLab Desktop Assistant
Menu: Account data /
Write and remove accounts to/from PrimeLab
The "PrimeLab Desktop Assistant" can manage as many accounts as required,
whilst on the PrimeLab device itself there is "only" sufficient memory space for 20
accounts and the associated 100 measurement values.
With a few clicks you can determine which accounts on the PrimeLab can be saved
and selected.
Click on the menu "Account data".
Under the first tab "Account data" all accounts saved in the software are displayed.
Under the tab "Account on PrimeLab" you can check which accounts are currently
stored on the device.
Tick the box beside the account you want to remove from the device, then right click
on the selected account
data set to open a menu
with the options to delete
the account data set or
only the measurement
values associated with
this particular account
from the device.
So if you want to remove
several accounts and /
or measurement results
from the device, simply
tick the box beside the respective accounts to be removed before you right click to
open the menu and select the delete command.
To save accounts (without the measurement results) from the database on the
PrimeLab device, place a
tick in the tab "Account
data" in front of the
respective accounts and
then click on "Write to
PrimeLab".
If you try to save more
than a total of 20
accounts on the
PrimeLab an error
message is displayed.
PDA-22 PDA-22