Set Ideal Ranges (Parameters) - PrimeLab 1.0 MULTITEST User Manual

Menu: SET (Setup)

Set ideal ranges (parameters)

There is the option of selecting an ideal range for every test and
measurement parameter by indicating in this menu which range (minimum
and maximum) you would classify as "good" or "acceptable" for this
particular parameter. According to your classification the results gained
from subsequent measurements and tests will be rated as "OK", "Low" or
"High".
The "PrimeLab Desktop Assistant" will also calculate the dosage
recommendation on the basis of the minimum and maximum range limits
set by you for the ideal range!
In the start menu press button 4 to access the SETUP menu.
4
In the setup list scroll up with button 2 and down with button 3 until the
2
entry "Ideal range" appears in white on black.
3
Then press button 4.
4
Scroll up and down the list by pressing button 2 and 3 respectively until
2
the required entry (parameter name) appears white on black.
3
Confirm your selection by pressing button 4.
4
First the minimum value must be entered. This, as well as the maximum
value, must be within the specific measurement range for the particular
parameter.
2
Adjust the minimum value by pressing button 2 and 3 (up and down).
3
Confirm the setting by pressing button 4.
4
Adjust the maximum value by pressing button 2 and 3 (up and down).
2
3
Save the settings by pressing button 4.
4
SET 3 SET 3