PrimeLab 1.0 MULTITEST User Manual page 274

Sulphide
(140)
Continued...
11) After the lapse of a 10 minute countdown the determined result is
3
displayed. Press button 3 to convert this into various measurement units
(*).
12) Press button 4 to save the result together with date and time in the
4
device.
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
Note(s)
-> (*) Conversion to H S
-> The temperature of the water sample must be at 20°C to avoid inaccuracies
in the measurement.
241
0 - 0.7 mg/l
Name on device: 140-Sulphide-Ha
Possible messages in the line below the measurement value:
"low! / high! / good!":
"Overrange! / underrange!":
2
(S) Liquid
241