PrimeLab 1.0 MULTITEST User Manual page 137

Hardness-total (HR)
(148)
Continued...
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
Note(s)
-> (*) Conversion to °dH, °eH, °fH and Ca
-> Sulfide (high levels), Sulfite, Thiosulfate and Hydrosulfite interfere with the
measurement
104
0 - 500 mg/l
Name on device: 148-Hard-tot-liq
Possible messages in the line below the measurement value:
"low! / high! / good!":
„Overrange! / underrange!":
(CaCO )
3
Liquid
104