Cleaning - IDEC WB1F Series User Manual

1. Overview 2. Installation & wiring

Cleaning

z Cleaning the reading window
If dust, dirt, or water drops get on the reading window or if it gets scratched, this
will affect barcode reading performance.
Periodically inspect the reading window to see if there is anything on it, and when
you find something, clean it off.
Cleaning methods
To clean the reading window, blow off dust/dirt with an airbrush, and then gently wipe it off with a soft-tipped item
z
such as a cotton swab.
If there are water drops on the reading window, wipe them off with a soft cloth.
z
Always turn off the power supply before cleaning the product.
z
PMMA is used for the reading window material, so do not use organic solvents (such as alcohol, thinner, or
benzine), ammonia, or sodium hydroxide. Otherwise this may change the properties of the reading window.
z Cleaning the unit
Please wipe the dust off a body of the WB1F with a soft, dry cloth.
z
When that body is very dirty, please wipe it with a cloth soaked in a neutral detergent diluted with water and wrung out
z
thoroughly, and then wipe it with a soft, dry cloth.
Do not use organic solvents such as alcohol, thinner, or benzine.
This may alter the case or strip the paint.
3. Functions 4. Support tool 5. Appendix
SAFETY PRECAUTATIONS
Reading
window
vii