Table of Contents
Advertisement
Version up information
This is version up information for the WB2F Support Tool. Please check Software Version and Database Version
before using.
"7.6.2 Version
Refer to
Fixes and Improvements
Initial release
General terms, abbreviations, and terminology used in this manual
The general terms, abbreviations, and terminology used in this manual are as follows.
Item
WB2F
Communication unit
Quiet zone
Control character
RAM
ROM
Our website
5 / 35
WB2F Support Tool User's Manual
information" in
Help" before checking the version.
"7.6
Abbreviation for the WB2F-100S1B.
Indicates the Communication Unit Supporting Code Scanner WB9Z-CU100. This
is a protocol converter for the purpose of connecting the WB2F to an
RS-232/RS-422/Ethernet compatible device.
The blank area around the symbol.
ASCII code 00H - 1FH, 7FH. For details, refer to
Appendix".
"9.
Abbreviation for Random Access Memory. Used to read and write temporary
data. The data disappears when the power of the WB2F is turned off.
Abbreviation for Read Only Memory. Only used to read data. The data does not
disappear when the power of the WB2F is turned off.
www.idec.com/
WB2F-SOFT-SUPPORT-TOOL-MANUAL-E
WB2F Support Tool Version
Software Version
Database Version
001.000.00
Definition
"9.1. ASCII code
001.000.00
table" in
B-1956(0)
Advertisement
Table of Contents
