Physical Processor Configuration - Hitachi CB 520H A1 User Manual

processor binding or disable the guest NUMA, you must reconfigure this
configuration.
Note:
• When there are an LPAR on which a processor number is specified and an
LPAR on which no processor number is specified, activate the LPAR on
which the processor number is specified first.

Physical Processor Configuration

The following functions are possible in the Physical Processor Configuration
screen.
Example of Physical Processor Configuration is below.
The following table describes each item on this screen.
No.
(1)
(2)
(3)
7-32
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-10 Physical Processors Configuration Screen
Table 7-11 Details of Physical Processors Configuration Screen
Item
Processor# Displays the physical processor numbers.
Blade# Displays the server blade number on which
the physical processor is installed.
Socket# Displays the die number/socket number in
the server blade.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
- 01-0X~
- 01-0X~