Creating Boot Option - Hitachi CB 520H A1 User Manual

16 Return to EFI Shell by exit command.
.
17 Execute reconnect –r command, then execute map –r command.
.
Display content depends on environment.
18 Enter exit command.
.

Creating boot option

Note:
• After installing the OS, if you set up a multi-path configuration, create a
boot option for both paths. Note that, for a logical EFI (X64.UEFI), you
can use the boot option that was automatically created during OS
installation, for both paths in the multi-path configuration. In other words,
you do not need to create individual boot options for each path.
It is necessary to create the boot option according to the use. If the boot
option has been set already, you do not need the following procedure.
Logical BIOS
(IA32.UEFI)
FC STORAGE DEVICE
USB STORAGE DEVICE
NETWORK BOOT
DEVICE
5-40
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 5-5 Boot option
Boot device
Logical EFI
(X64.UEFI)
• NO VOLUME
LABEL
• SYSTEM
(The displayed
information might
vary depending on the
boot medium.)
• EFISECTOR
• ANACONDA
(The displayed
information might
vary depending on the
boot medium.)
Load File
Setup of LPAR manager
Boot type
SAN boot Boot guest OS
CD/DVD boot Use CD/DVD
Network boot Use SC/DPM
use