Hitachi CB 520H A1 User Manual page 250

No.
(10)
(11)
(12)
(13)
(14)
(15)
7-12
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Interface
Card)
PN Displays the processor node.
A: Shows the node is automatically
assigned.
0 to Maximum Node number: Shows the
displayed Node only has been assigned.
M: Shows the multiple Nodes are
assigned.
MN Displays and configures the memory
node.
A: Shows the node is automatically
assigned.
0 to Maximum Node number: Indicates
that the displayed node number will be
assigned to the LPAR when the LPAR is
in Deactivate status.
Indicates that the displayed node
number is assigned to the LPAR when
the LPAR is in Activate status.
M: Indicates that multiple nodes are
assigned to the LPAR.
NM: Indicates that the NUMA setting of
the LPAR is enabled.
ID Enables/disables the function that
detects the idle state of the logical
(Idle
processors.
Detection)
Y: Enables Idle Detection.
N: Disables Idle Detection.
Set this item to Y to use CPU resources
efficiently.
AA Sets the automatic activation of an LPAR
when LPAR manager boots.
(Auto
Activation *: Auto Activate is not set.
Order)
1-99: Enables Auto Activate. The
number represents the order in which
the LPARs are activated. Small number
is given priority.
AC Enables/disables the function that
automatically clears the logical SEL.
(Auto Clear)
Y: Enables Auto Clear.
N: Disables Auto Clear.
PC Enables/disables the Processor Capping
function.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
A 01-2X~
A 01-2X~
Y 01-0X~
* 01-0X~
N 01-0X~
* 01-0X~