Audit Log Settings; Audit Log Format - Hitachi CB 520H A1 User Manual

Audit log settings

To set the audit log, perform the following operations:
Audit log settings
Audit log configuration
settings
Registering a certificate for
an LPAR manager client or a
certificate authority

Audit log format

The format of the audit log is explained below.
Priority
Syslog version
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Table 3-35 Web console
Item
Resources tab > Modules > All Modules > Server Blades >
Server Blades x > LPAR manager tab > Edit button > Edit
syslog transfer settings
Table 3-36 HVM management command (HvmSh)
Item
opr AuditLogConfig
opr HvmClientCertificateRegist
Table 3-37 Audit log format
Item
High Reliability Functions
Scope of support
• Authentication (LPAR manager firmware version
02-40 or later)
Logs for user authentication will be collected.
• Authentication and modification (LPAR manager
firmware version 02-55 or later)
In addition to the logs for user authentication,
the logs for user operations to change the
settings or status of LPAR manager or of an
LPAR will be collected.
Operation
Command name
Description
Depending on the severity of the audited event, this
is displayed in the following format: <value>
<13>: Displays facility=user, severity=notice.
<14>: Displays facility=user, severity=info.
When an operation fails, <13> is output.
In all other cases, <14> is output.
"1" is output.
3-29