Front Panel - Hitachi CB 520H A1 User Manual

No.
How to change Sampling time
Since the cursor is already placed on the Sampling time, just press Enter to
display a sub-screen. Enter the new number on the sub-screen, and press
Enter.
How to display specified processor groups
Place the cursor on Grp on the upper right, and press Enter to display a sub-
screen. Select the number of a processor group shown on the sub-screen,
and press Enter.

Front Panel

The following actions are possible in the Front Panel screen. Example of Front
Panel screen is below.
7-124
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
execution time of all LPARs, SYS1, and
SYS2.
Busy(%) displays the system busy ratio.
This value is the total busy ratio in the
LPAR manager system, and is obtained by
the following formula.
Busy(%) = system busy time ÷ system
service time x 100
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version