Hitachi CB 520H A1 User Manual page 347

Logical partitioning manager, compute blade 500 series
Hide thumbs Also See for CB 520H A1:
Table of Contents

Advertisement

No.
Item
(17)
Copy NVRAM
(18)
-
(19)
-
What is Pre-State Auto Activation?
Pre-State Auto Activation ascertains and saves the activated / deactivated
status of LPARs so that, in the event of an LPAR manager reboot following
a power supply failure or forced shutdown of the server blade, the LPARs
can be automatically activated to the same status they were in before the
LPAR manager reboot.
When the LPAR manager system is normally shut down, even if Pre-State
Auto Activation is set to 'Yes', it will not automatically activate LPARs.
When Auto Activation is performed due to Pre-State Auto Activation, the
Auto Activation Order setting is ignored. In this Auto Activation, the
LPARs are automatically activated starting from the smallest LPAR
number.
However, if a memory node number is specified for an LPAR in MN
(memory node) on the Logical Partition Configuration screen, or if the
guest NUMA is enabled for an LPAR, the Pre-State Auto Activation
priorities change.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
If the specified LPAR has been
activated, this column will automatically
change to an LPAR that has been
deactivated.
Copies the contents of the NVRAM of
the LPAR specified by (18) to the LPAR
specified by (19)
This operation cannot be performed if
"Select" is displayed in (18) or (19).
(The cursor cannot move over this
column.)
"Copy NVRAM" copies the boot order
settings, but does not copy the EFI
driver settings.
Displays the LPAR from which the
NVRAM will be copied.
"Select" will be displayed if no LPARs
have been defined.
Displays the LPAR to which the NVRAM
will be copied.
You can specify only a deactivated
LPAR. "Select" will be displayed if no
LPARs have been defined, or if LPARs
had been defined, but all LPARs have
been activated.
If the specified LPAR has been
activated, this column will automatically
change to an LPAR that has been
deactivated.
Supported
Default
LPAR
Value
manager
Version
-
01-0X~
-
01-0X~
-
01-0X~
7-109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents