Hitachi CB 520H A1 User Manual page 337

• Place the cursor on LPAR SEL Time on the Date and Time screen and
press Enter to display a sub-screen. Select LPAR RTC and press Enter.
• Place the cursor on TimeSynch on the Date and Time screen and press
Enter to display a sub-screen. Select Disable and press Enter. NTP
Connection should be Disabled, otherwise the time zone cannot be
changed.
• Press F7: Change System Time Zone on the Date and Time screen to
display a sub-screen. Set a time zone and press Enter.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-56 Setting of the time-zone
Figure 7-57 Selection of the LPAR RTC
Figure 7-58 Changing TimeSync to Disable
7-99