Hitachi CB 520H A1 User Manual page 504

SMP
configuration
Max LPAR No.
processor
A-10
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table A-4 Functions which LPAR manager supports
Item
2-blade SMP
13
14
4-blade SMP
Max LPAR No. which can be defined
Max LPAR No. which can be Activated.
Minimum division unit
Max logical
Processor No.
Dedicated
Processor
Shared Processor
The Max group No. which can be
defined
Hyper Thread
Scheduling Mode dynamic change
Partition Reference Time
Enlightenment (PRTE)
Setting Item Catalogue
Y (01-8X or later)
Y (01-9X or later)
30 (01-0X or later)
60 (02-0X or later)
Essential: 4 (01-0X or later)
Advanced: 30 (01-0X or
later)
Enterprise: 60 (02-27 or
later)
Thread (01-0X or later)
CB 520H A1/B1/ 32 (01-0X or later)
B2
CB 520H B3 64 (02-05 or later)
72 (02-50 or later)
CB 520H B4 88 (02-50 or later)
CB 520A A1 32 (01-1X or later)
CB 540A A1/B1 32 (01-2X or later)
CB 520X B1/B2/ 32 (01-8X or later)
B3
64 (01-9X or later)
72 (02-28 or later)
240 (Only Dedicated mode,
and 02-40 or later)
Physical Processor Y (01-0X or later)
No.Specifier
Physical Processor Y (01-0X or later)
No.Specifier
Service rate Y (01-0X or later)
Idle Detection Y (01-0X or later)
Processor capping Y (01-0X or later)
Essential: 4 (01-0X or later)
Advanced: 30 (01-0X or
later)
Enterprise: 60 (02-27 or
later)
Y (01-0X or later)
Y (01-0X or later)
Y (02-25 or later)
Support (version)