Hitachi CB 520H A1 User Manual page 361

No. Item
(19) SYS1 Displays the execution time and the busy
ratio of the LPAR manager System1.
LPAR manager System1 see the processing
by the kernel of the LPAR manager.
(Note)
The busy ratio and execution time of the
faulty processor isolated are contained in
SYS1.
Dsp(ms) displays the execution time of the
LPAR manager System1.
Busy(%) displays the busy ratio of the
LPAR manager System1.
This value is obtained by the following
formula.
Busy(%) = execution time of the LPAR
manager System1 ÷ system service time x
100
(20) SYS2 Displays the execution time and the busy
ratio of the LPAR manager System2.
LPAR manager System2 see the processes
for the LPAR manager's communication and
service control.
Dsp(ms) displays the execution time of the
LPAR manager System2.
Busy(%) displays the busy ratio of the
LPAR manager System2.
This value is obtained by the following
formula.
Busy(%) = execution time of the LPAR
manager System2 ÷ system service time x
100
(21) System Displays the system service time, the
Total system busy time and the system busy
ratio of the LPAR manager system.
Srv(ms) displays the system service time.
This value is the total service time that the
physical processors running properly have
in the LPAR manager system, and is
obtained by the following formula.
Srv(ms) = the number of physical
processors running properly x 1000ms
Dsp(ms) displays the system busy time.
The system busy time is the sum of the
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
--- 01-0X~
--- 01-0X~
--- 01-0X~
7-123