Hitachi CB 520H A1 User Manual page 522

item
VC
LP CLI
Expiry
Type
SYS2 Processors
LPAR Select Display
manager
Screen
System Time Zone
Date and
Time
TimeSync
LPAR Pre-State Auto Activation
manager
Screen
LP Options
LP Auto Shutdown
LP ErrorWatching
PhyCPU C-State (>= C3)
USB Auto Allocation to LPAR Sets an Enable if you want to
Save changed Config
Format
LP Timercounter Base
B-4
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Setting items Description
Sets whether to perform user
authentication when connecting to
the guest screen.
Sets whether to perform user
authentication when performing
connection by using the LP CLI.
Sets the password expiration
date.
Sets the virtual COM console
connection method.
Set the upper limit of the number
of the physical processors used by
SYS2.
Selects a time display.
Sets a time zone of LPAR
manager System.
Select a time synchronous setup
by a NTP server.
*recommends making a setup
which performs matching the time
by a management module.
Sets a Yes for restoring LPAR to
same condition as previous LPAR
before rebooting LPAR manager
by accident.
Sets a Yes for shutting down
when all LPARs are in deactivated
status.
Sets a Yes for detecting a hung-
up state.
Sets an Enable when a save
electric power function enables.
enable USB-Automatic-Attach
when LPAR is activated /
reactivated.
Sets an Enable to enable the
configuration
Information auto save function.
Specifies the base for
TimerCounter.
*LP TimerCounter Base is
displayed when the timer
Setting Item List
Support
default
Version
Disable 02-05 or
later
Disable 02-05 or
later
0 02-05 or
later
Telnet 02-05 or
later
2 02-62 or
later
LPAR RTC 01-0X or
later
+ 0:00 01-0X or
later
Disable 01-0X or
later
No 01-0X or
later
No 01-0X or
later
Yes 01-0X or
later
Enable 01-0X or
later
Enable 01-0X or
later
Disable 01-0X or
later
TSC 01-3X or
later