Hitachi CB 520H A1 User Manual page 65

The following example is for 17-ports (1 port/LPAR) layer 2-switch when
the number of LPARs is 16 and 1 shared NIC per LPAR.
– Up to 16 pieces of this switch can be mounted depending on the
number of physical NICs with shared setting.
– Ports 1 – 16 are configured by the shared NICs and Port17 by the
physical NIC port.
Table 1-36 List of switch functions of shared NIC
Switch function
Port Connection
Port Speed
VLAN
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 1-31 Image of VLAN Switch
Target Port
Port1 - Port16
Port17
Port1 - Port16
Port17
Port1 - Port16
Port17
LPAR manager Functions
Settings
Assign to LPAR on the Virtual NIC
(VNIC) Assignment screen.
Connect to physical cables.
With the Onboard NIC, no cable is
required.
Auto Negotiation (This setting cannot be
changed.)
- Supports 1000BASE-TX.
Auto Negotiation (This setting cannot be
changed.)
- Supports 10/100/1000/10000BASE-TX
[VLAN mode]
- Undef (Default)
- Tagged
- Untagged
Only 1 VLAN mode can be set per LPAR.
[VLAN ID]
- Tagged: Up to 16 VLAN IDs out of the
range from 1 to 4094, or Assign all (ID).
- Untagged: Only one (1) VLAN ID out
of the range from 1 to 4094
Tagged All (This setting cannot be
changed).
Configured to transmit all packets.
1-51