Hitachi CB 520H A1 User Manual page 461

ID
01003216
"Set the PRTE option for the LPAR.
LPARxxx Value:xxx"
01003217
"Failed to set the PRTE option for the
LPAR. LPARxxx Value:xxx"
01003218
"Set the Physical NUMA Node Binding
Mode for the LPAR. LPARxxx Value:xxx"
0100321A "Set the number of logical processors
for the LPAR NUMA node. LPARxxx
Node#:xxx Value:xxx"
0100321C "Set the timeout for LPAR migration.
LPARxxx Value:xxx"
0100321E
"Set the FC login timeout for LPAR
migration. Value:xxx"
01003224
"Set the FC login delay for LPAR
migration. Value:xxx"
01003226
"Set the FC logout delay for LPAR
migration. Value:xxx"
01003234
"Requested to cancel the LPAR
migration. Accept:xxx LPARxxx"
0100323A "Requested to set the LP TimerCounter
Base. Accept:xxx Value:xxx"
0100323C "Set the LP TimerCounter Base.
Value:xxx"
0100323D "Failed to set the LP TimerCounter
Base. Value:xxx"
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Message
Messages
Operation for which an audit log is
collected
When the LPAR manager screen is used to
request change of the PRTE setting for an
LPAR and the request succeeds
When the LPAR manager screen is used to
request change of the PRTE setting for an
LPAR and the request fails
When HvmSh and so on is used to request
change of the logical processor assignment
setting for the guest NUMA for an LPAR and
the request immediately succeeds
When HvmSh and so on is used to request
change of the number of processors for
NUMA nodes and the request immediately
succeeds
When HvmSh and so on is used to request
change of the timeout period for LPAR
migration and the request immediately
succeeds
When HvmSh and so on is used to request
change of the timeout period for logging into
a storage system and the request
immediately succeeds
When HvmSh and so on is used to request
change of the storage login delay time for
LPAR migration and the request immediately
succeeds
When HvmSh and so on is used to request
change of the storage logout delay time for
LPAR migration and the request immediately
succeeds
When HvmSh and so on is used to request
suspension of the migration execution and
the request is accepted
When HvmSh and so on is used to request
change of a base value for calculating the
Timer Counter Base timer counter (Timer
Counter Base) and the request is accepted
When the LPAR manager screen is used to
request change of a base value for calculating
the Timer Counter Base timer counter (Timer
Counter Base) and the request succeeds
When the LPAR manager screen is used to
request change of a base value for calculating
the Timer Counter Base timer counter (Timer
Counter Base) and the request fails
9-85