Hitachi CB 520H A1 User Manual page 77

Requirement
Install a version of Fibre Channel driver and a version of Fibre Channel
firmware supporting the HBA-core dedicated feature. For the versions of Fibre
Channel driver and the versions of Fibre Channel firmware supporting the
HBA-core dedicated feature, see the HITACHI Gigabit Fibre Channel Adapter
USER'S GUIDE (Support Matrix Edition).
FC adapters supporting this mode
The following lists FC adapters that support HBA-core dedicated mode:
Table 1-45 FC adapters that support HBA-core dedicated mode
Item
Hitachi 16Gb 2-port fibre channel
Mezzanine card
Hitachi 16Gb 4-port fibre channel
2
Mezzanine card
Notes:
1 In the same way as for an ordinary shared FC, vfcIDs can be assigned to LPARs.
.
However, if HBA-core dedicated mode is enabled, the maximum value of the vfcID
that can be assigned is limited to the number of HBA cores on the FC adapter.
Although a vfcID greater than the number of HBA cores can be assigned to the
LPAR, activation of the LPAR is suppressed.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Number of coresport
LPAR manager Functions
Assignable vfcID
2
1
1
1 or 2
1
1-63