Hitachi CB 520H A1 User Manual page 67

Switch function
Port Speed
VLAN
Port mirroring
Jumbo frame function
Uplink failover
Flow control
IGMP Snooping
Spanning tree
Notes:
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Target Port
Port17
Port1 - Port16
Port17
Port1 - Port16
Port17
Port1 - Port17
Port1 - Port17
Port1 - Port17
Port1 - Port16
Port17
Port1 - Port17
Port1 - Port17
LPAR manager Functions
Settings
Connect to physical cables.
With the Onboard NIC, no cable is
required.
Auto Negotiation (This setting cannot
be changed.)
- 10GBASE-KR
- 1000BASE-KX
Auto Negotiation (This setting cannot
be changed.)
- 10GBASE-KR
- 1000BASE-KX
[VLAN mode]
- Undef (not supported)
- Tagged (default)
1
- Untagged
Only 1 VLAN mode can be set per
LPAR.
[VLAN ID]
- Tagged: Assign all (ID).
- Untagged: Only one (1) VLAN ID out
of the range from 1 to 4094
Tagged All (This setting cannot be
changed).
Configured to transmit all packets.
- If promiscuous mode is "Restricted"
(default):
Receives only the packets to the
target LPARs (MAC addresses).
- Through
Not supported
Always enabled.
Maximum value: 9000 bytes
Always enabled.
If Port 17 is linked down, all the other
ports from Port 1 to Port 16 are also
linked down.
Always disabled.
Always enabled.
Always disabled.
Always disabled.
1-53