Hitachi CB 520H A1 User Manual page 409

Message Content
Explanation
What to do
Message Content
Explanation LPAR manager detected reduction of the number of physical
processors.
What to do Back up the LPAR manager configuration and exit safe mode.
Check whether physical processors are isolated.
If you cannot resolve the problem, contact your reseller or
maintenance personnel.
Message Content
Explanation LPAR manager detected reduction of the memory size.
What to do Back up the LPAR manager configuration and exit safe mode.
Check whether memory is isolated.
If you cannot resolve the problem, contact your reseller or
maintenance personnel.
Message Content
Explanation A shared I/O device that has not been initialized was detected.
What to do Contact your reseller or maintenance personnel.
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP detected PCI bus error for Shared FC at expansion card.
A PCI bus fault in shared FC was detected.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP detected reduction of CPUs.
LP detected reduction of memory.
LP detected uninitialized Shared device.
LP detected unsupported version of firmware on a NIC
Unsupported firmware version was detected on a NIC device.
Check the NIC firmware version is supported or not. If this action
takes no effect, contact the reseller from which you purchased
this equipment or consult maintenance personnel.
LP failed to get Personality and Multichannel Mode on a
LPAR manager failed to obtain the Personality setting and
Multichannel mode from the NIC device.
Reboot the LPAR manager. If this LP system log is collected after
rebooting, contact the reseller from which you purchased this
equipment or consult maintenance personnel.
LP failed to get the firmware version on a NIC device.
Retrieving the firmware version from a NIC device failed.
Messages
device.
NIC device.
9-33