Specify The Method Of User Authentication; Local Authentication - Hitachi CB 520H A1 User Manual

Enabling and disabling user
authentication
Notes:
1 To enable user authentication on the virtual COM console, change the settings to
.
"Connection mode: Telnet" and "Telnet authentication: Enable".Alternatively, change
the settings to "Connection mode: SSH".
2 You can switch pages by pressing the F11 and F12 keys on the System
.
Configuration screen.
Note:
• HCSM is connected to LPAR manager via a management module. For this
reason, you do not need to change HCSM settings even if you enable user
authentication on LPAR manager.

Specify the method of user authentication

To specify the method of user authentication, perform the following
operations:
The default value is the local authentication.
Method of user authentication Resources > Modules > All Modules > Server Blades >
LDAP configuration setting

Local authentication

This section explains local authentication, which is supported by LPAR
manager.
Scope of support
The following is the scope of support for local authentication:
3-20
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 3-12 HVM management command (HvmSh)
Item
opr HvmIfAuthentication
1
Table 3-13 Web console
Item
Server Blades x > LPAR > Edit > Edit authentication
settings
Table 3-14 HVM management command (HvmSh)
Item
opr ExternalAuthentication
High Reliability Functions
Command name
Operation
Command name