Hitachi CB 520H A1 User Manual page 383

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP-Loader detected Emulex Multi Channel mode (Bus:0xXX,
Dev:0xYY, Fnc:0xZZ), which is not supported. Please
disable Emulex Multi Channel mode.
YY: Device number
ZZ: Function Number
LPAR manager cannot boot due to the Enabled multiple channel
support of Emulex NIC.
Set "Multichannel Support" as <Disabled>.
See the Hitachi Compute Blade Emulex Adapter User's Guide for
Hardware for setting it.
However, it cannot be changed in LP mode. If necessary, change
it in Basic mode.
LP-Loader detected invalid configuration files.[version is
(ErrorCode:XXXXXXXXXXXXXXXX
AdditionalCode:XXXXXXXXXXXXXXXX)
Please Power Off Partition.
LPAR manager cannot boot due to the file with incorrect
configuration information.
Restore a file with a correct configuration information.
LP-Loader detected invalid Virtualization Technology
setting in this system.
MSR INFO [0xXXXXXXXXXXXXXXXX]
Please set Virtualization Technology setting to enable.
LPAR manager cannot boot due to the Disabled Virtualization
Technology Setting.
Set Enable in Virtualization Technology Setting using the EFI
setup menu.
For details about the setup method, see the Hitachi Compute
Blade 500 series EFI User's Guide.
LP-Loader detected OEM FRU was unsupported version.
Unsupported FRU version was detected.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP-Loader detected VfcSeed.dat format error.(Error Info:
The incorrect format is detected on VfcSeed.dat file, having the
Vfc seed information, and the N+M cannot be performed.
XXXX: cause
Messages
XX: Bus number
unmatched]
(ver:XXXX)
0xXXXX)
9-7