Hitachi CB 520H A1 User Manual page 272

No.
(14)
(15)
(16)
(17)
Note:
• If unrecoverable failure occurs in the physical processor, the following
symptom may occur.
– NIC sharing function is temporarily unavailable and communication with
the management module and external networks break down.
– Dedicated mode: A failure occurs in the LPAR using the failed physical
processor in the dedicated mode. Other LPARs are not affected.
– Shared mode: LPARs using the processor in the shared mode will have
failure when a fault occurs in the processor. Other LPARs performance in
the shared mode may slow down. When this happens, deactivate the
slow-down LPAR and then reactivate it to restore it.
How to change the number of a processor group
Place the cursor on the intersection between the Processor column whose
group number to change and Group line, and press Enter to display a sub-
screen that displays the numbers of defined processor groups. Select a
processor group number to change, and press Enter.
7-34
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Maximum character length of processor
group name is 31. And identical processor
group name cannot set to 2 or more files.
The 7th character is changed to tilde '~'
and the later characters are omitted when
the length of processor group name is 8 or
more.
'0' ~ '9', 'A' ~ 'Z', 'a' ~ 'z', '-'and '_' can be
used for processor group name. However
only 'A' ~ 'Z' and 'a' ~ 'z' can be used for
the initial character.
Total Core Displays the number of total cores.
Shr Core Displays the number of cores in shared
mode.
Ded Core Displays the number of cores in dedicated
mode.
Function Displays function keys available in this
Key screen.
F1: Adds a processor group.
F2: Deletes a processor group.
F11: Scrolls the screen to the left.
F12: Scrolls the screen to the right.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~