Radius Authentication - Hitachi CB 520H A1 User Manual

LDAP configuration settings
Security settings on the
destination for encrypted
communication
Settings on whether to
validate the certificate when
encrypted communication is
performed
Registration of the
certificate of the
communication destination
or the certificate of the
certificate authority

RADIUS authentication

LPAR manager supports RADIUS authentication and local authentication.
This section explains the RADIUS authentication as supported by LPAR
manager.
Scope of support
The scope of support for RADIUS authentication is shown below.
RADIUS server type FreeRADIUS and the following Network Policy Servers are
Number of RADIUS
servers
User name and
password to be
registered on the
RADIUS server
3-26
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 3-29 HVM management command (HvmSh)
Item
opr LdapConfig
opr LdapPasswd
opr HvmIfSecureLevel
opr HvmIfSecureVerify
opr HvmClientCertificateRegist
Item
supported:
• Windows Server 2008
• Windows Server 2008 R2
• Windows Server 2012
• Windows Server 2012 R2
• Windows Server 2016
Maximum of three LDAP servers (LDAP servers will be accessed in
the order of LDAP server 1, LDAP server 2, and LDAP server 3.
Authentication will be performed by using the server that responds
earlier than the other servers.)
The following are the requirements for user names and passwords
to be used for LPAR manager authentication:
• The user name must be 1 to 31 characters, and can contain
alphanumeric characters, periods (.), hyphens (-), and
underscores (_). The user name must begin with a letter.
• The password must be 1 to 31 characters, and can contain
alphanumeric characters and symbols other than spaces.
High Reliability Functions
Command name
Scope of support