Hitachi CB 520H A1 User Manual page 327

Place the cursor on LPAR SEL Time and press Enter. The SEL time of the
LPAR appears. Place the cursor on the Time Zone column of the LPAR line to
change the SEL time zone and press Enter. The sub-screen for selecting the
SEL time zone appears. Select SEL time zone, and press Enter.
Adjust LPAR Time
"Adjust LPAR Time" adjusts the time of LPAR to the LPAR manager system
time. The time of LPAR can be adjusted only for a deactivated LPAR.
[LPAR manager firmware version 01-5X or lower]
• Place the cursor on Adjust LPAR Time and press Enter key on the Date
and Time screen.
• Select the target LPAR and press Enter key.
• Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
[LPAR manager firmware version 01-6X or later]
Example for using Adjust LPAR Time (LP System Time, Specified Zone,
and UTC) as follows:
Guest OS Timer
Mode
LocalTime
UTC
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 7-32 Adjust LPAR Time
Guest OS Time Zone
Same as LPAR
manager Time Zone.
Different from LPAR
manager Time Zone.
Unknown which is the
same as Time Zone.
Same as LPAR
manager Time Zone.
Adjust LPAR Time
LP System Specified
Time Zone
Y -
- Y
- -
- -
UTC
-
-
-
Y
7-89